Categories
Woodworking Tools

Home or Professional Jigsaw – How to Choose

Electric jigsaw can make transversal, longitudinal and figurative cuts of various sheet materials. Know home or professional jigsaw, how to choose?

This device is appreciated by home masters and professionals for its ease of use and versatile capabilities.

Home or professional jigsaw

Household jigsaws have a small workforce and low power. They also have a very limited set of additional functions. Usually, these models are suitable for cutting steel products (0.4cm) and wood (7cm) thick. The total recommended time to use a household tool is about 20 hours per month. Of course, domestic models are less expensive than professional models. For professional electric jigsaws, higher requirements are required. They must withstand severe loads, be as convenient as possible and have high productivity. A professional tool can cut steel (1cm), aluminum (2cm) and wood (8-14cm). Its cost depends largely on the capacity, additional functions and the popularity of the brand.

Read also – Top 5 Jigsaws – Woodworking Tools

Additional resources

When choosing a jigsaw, pay attention to the tool identifier. It can be mushroom or staple. This does not affect the quality of the work. But, it’s more convenient to use the tool with mushroom handle on inclined plane. Using a saw with a clamp handle will make the cut line very visible.

The saws can be fixed with a fixture or screws. The first system is more convenient. It allows you to quickly change the screen without using special tools.

In most modern chainsaw models, there is a pendulum mechanism. It communicates the horizontal motion sensor. It helps to cut material only when moving upwards. This function prolongs the life of the saw and makes work more productive. But, at the same time, it is not for the better. It can affect the quality of the cut.

Therefore, when it is necessary to obtain a clean cut, this function must be turned off. In addition, don’t use the pendulum movement when working with hard wood and steel plate. Another useful function for working with different materials is to adjust the stroke frequency. On some devices, this parameter is set immediately before turning on. On others models, it is adjusted by pressing the Start button. Increasing the stroke frequency increases productivity, but contributes to rapid screen wear.

For the tool to work well, lubricate the machines regularly and keep it clean. Follow the manufacturer’s instructions when doing the job.

To ensure cleanliness in the workplace, some models have a nozzle for vacuum cleaner. Small pieces and dust will be drawn by the vacuum cleaner. It frees the work area and improves the visibility of the cut.

Home or professional jigsaw – Conclusion

Although they think it a simple question, many people find it difficult to decide. When purchasing the jigsaw, you must pay attention to some factors that influence the cut.

It facilitates detailed and curved cuts. It cuts up to 45o, in a curve or straight line, inclined or perpendicular. It can be used to cut materials such as wood, plastic, metals, floors and ceramic tiles. The depth that reaches the cut can vary according to the function and blade length.

Categories
Woodworking Tools

How to Use the Jigsaw Correctly

Jigsaw is a great tool to create decorative pieces of wood. Let’s see what this device is and how to use the jigsaw correctly.

This is an electrically operated jigsaw to cut various types of sheets. According to the function, the jigsaws are:

  • Professional;
  • Semi-professional:
  • Household.

Read also – Top 5 Jigsaws – Woodworking Tools

The differences are in the technical features and functions of the tools.

Before learning how to use the jigsaw correctly, you have to become familiar with the device. This tool has following components:

  • Aluminum body
  • This powerful tool can cut through thicker and more resistant material
  • Covered gearbox
  • Pendulum stroke adjustment buttons. It enables you to create accurate cuts on material with less density
  • Housing and shackles guarantee safety at work
  • Basic roll for driving sheets
  • Blower regulator
  • There are a range of available blades. The speed is set according to them
  • Plate tilt adjuster – It allows wood cutting at different angles such as 15, 30, 45 and 90 degree
  • Laser guide enables you to keep the line drawn for the cut
  • Keyless chuck performs the function of a saw
  • Battery enables you to use this tool for some time without being connected to the power

Choosing the blades for jigsaw

The blades are purchased separately. They are chosen according to the material you need a cut. The packaging has mentioned the main function of the blade. Their packing also shows the material they’re made of. In addition, it also indicates the size of the teeth and the direction to use.

What can be sawn with a jigsaw?

  • Wood, plywood;
  • Drywall;
  • Metal;
  • Aluminum;
  • Plastic foam;
  • Glass;
  • Ceramics;
  • Eraser;
  • Skin;
  • Carpet.

Consider the kinds of jigsaw blades and think what you want to do with each one.

The blades of jigsaw

Wide canvas blade – It is designed to cut the sheets in straight track. With this blade, you do not have to do much effort. But, you only to make only slight direction adjust. For a more precise cut line, you have to allow the “Soft start” function. It increases the motor speed gradually.

Strait blade – It cuts the sheet alongside the curved line. For cutting with maximum precision, take the tool with a rotational head. The rotation radius of the head relies on the jigsaw model.

Big teeth blade – Its function is to cut fast. At the same times, the quality is much closer to the success.

Saws with the fine screen and teeth – You can cut the most complicated shapes with this blade.

Working with blunt blades can break the tool because of the increased load. And the cutting quality will also decrease.

Extras tips about how to use the jigsaw correctly

Electric jigsaw belongs to hand tool. However, if required, they can be pulse radius and parallel stop.

Sometimes you have to cut a painted or varnished sheet. You will really don’t want to damage its fine surface. In such case, you can use the blade with fine teeth.

Some models use a pendulum mechanism. It speeds up the cutting process. This system is suitable to make coarse cuts. While working with metal and plastic, the pendulum mechanism is not useful.

Categories
Woodworking Tools

10 Wood Router Cutters You Need for Every Woodworking Job

Router cutters are responsible for shaping the cut. There are many brands and models with different purpose and thickness. Know top 10 wood router cutters.

However, in the midst of so many options, there is one question. Which wood router cutters are essential for my work?

With this in mind, we separated 10 types of cutters, divided into two groups. Group-A includes cutters for essential routers. Group-B includes non-essential cutter for low frequency of use.

Read also – Top 5 Wood Routers – Woodworking Tools

Group A – Essential wood router cutters

1- Straight mill

Straight cutters are the main parts of your kit. They are used to make grooves, cracks, fittings, etc. This type of cutter has different sizes (diameter). The most used are 1/4 inches and 1⁄2 inches.

2- Straight mill with bearing

This cutter has a bearing on the end. It helps to slide on the edge. It is used while the cutter trims the second piece leveling with the first. The rolling milling cutter is used for trimming plastic laminates or plywood finishes. It can also be used whenever using multiple layers of wood pieces.

3- Corner breaking mill

It’s ideal pieces to create a light and rounded appearance on the edges. It also has a bearing at its end to facilitate movement. This type of cutter also has a wide variety of sizes. The 1/4 ”and 3/8” measurements are the most frequently used.

4- Chamfer mill

This is another type for roughing corners. The user can vary the chamfer size by decreasing or increasing the cutter contact. Although there are several sizes, the most used is 45.

5- Rip mill

Want simplicity? It is the right cutter for you. Despite being the fifth option on our list, this cutter is very useful. The roller at the end of the cutter helps to control the width of the slot. By changing the bearing you can create slots of different sizes.

Group-B – Non-essential wood router cutters

6- Machine mill (Swallow)

It is used to make fittings or pins to assemble furniture using a template. If you don’t have a dovetail template, you can use the dovetail cutter with a base. You can also use it on a bench top to create this type of fitting.

7- Standard still mill with bearing

It is much like the rolling milling cutter. The difference is that the bearing is at the base instead of at the cutter end. It is used when you want a cut pattern or when making identical pieces.

8- Half milling mill

It is indicated to create a concave profile in the wooden pieces. It is widely used to make frames or furniture projects. It also has several measures.

9- Roman milling

It is to add more style and elegance to your project. There’re other variations of this drill model that would be the Classic and Reverse Cutter. But, the most used is certainly the Roman milling cutter. Still, it is good to have the other models for a specific project.

10- Cylindrical mill for rip

It is very useful for making tears and fitting other pieces. You can change the bearing for different sizes to vary the depth of the cuts.

We want to know which wood router cutters you use the most or like the most. Leave your comment below and share your experience with us.

Categories
Woodworking Tools

Buy a Wood Router Machine? The Things to Consider

There are several characteristics that are essential to know to buy a wood router machine. These must be taken into account when buying a model.

A wood router machine is a tool to make mechanized cutting jobs. You can use different types of bits with different cutting edges. With this tool, we can work on different types of materials.

However, the role of the wood router machine is to make hollow out. It finishes the edges and makes designs on the wood. It also makes the finishes look better with precision and aesthetics.

We must take into account several factors when buying a wood router machine.

Read also – Top 5 Wood Routers – Woodworking Tools

Things to consider to buy a wood router machine

1- Power

It is the key things to consider when you need to buy a wood router machine. The power of all equipment determines the working capacity of the tool. In the case of router machines, they can range from 1000 watts to 2000 watts.

The router machines of less power are used to work softwoods. The routers with greater power are used to work other materials of greater hardness. These are, for example, metals, plastics, and cardboard, among others.

2- Speed

Router machines should have several speed modes. This speed is adjustable. You can adapt the speed according to the hardness and thickness of the materials to be used.

To work with softer materials, it is recommended to use a maximum speed. It is the case of wood. But, when working other materials such as plastics and metals, lower speeds are recommended. This is to prevent the parts from being damaged by the temperature. The tool bits can get damaged when coming into contact with the material.

3- Diameter of the caliper bushing

This contains the unit of millimeters. There are 6, 8 and 12 mm. If you have a larger diameter, it will allow you to use thicker tool bits. These are used for jobs that require more power. And those that are 6 mm and 8 mm are used for usual DIY tasks. These 6 and 8 mm are the most common.

4- Weight

This should already be imagined, since a light router machine will allow easier handling. But, the thicker, more stable they are.

5- Cutting depth

This is also called the stroke length. It consists of the penetration of the material being worked. It varies according to the tool. The minimum should be 40 mm and the maximum 65 mm deep.

6- Accessories

Accessories, although it may not seem like it, are also very important. They will contribute to more optimal work.

7- Among these are:

  • Tool bits: It is a very important accessory. This can have teeth or blades that are used to brush and turn the material.
  • Replacement spindle: These are basically nuts that are responsible for holding the milling cutter in the machine.
  • Copier cap: It is a simple sheet that is screwed into the base of the milling machine. It fulfills the function of supporting the guide for better accuracy.
  • Worktable: This is necessary to work in a comfortable and precise way. A workplace will always be necessary to press the material on which it will work.
  • Dust vacuum: This will make the work more comfortable and simple while cutting the material.
  • Guides: They are templates that allow the user to make shapes. Some are extra long, which are for straight cuts.

Categories
Woodworking Tools

Purchase Criteria to Buy a Circular Saw

You may know already a bit about this type of saw. Now, know the main points and purchase criteria to buy a circular saw. It will help you select a right model of circular saw for you.

Come on!

Purchase criteria to buy a circular saw

1- Cutting disk size

The size of the circular saw cutting disc is in inches or centimeters. It is the key purchase criteria to buy a circular saw.

The most popular cutting disc diameter sizes are:

  • 4 inches (10 cm)
  • 7 1⁄4 inches (18cm)
  • 9 1⁄4 inches (23cm)
  • 13 inches (32.5cm)
  • 16 inches (40 cm)

Do not confuse with the size of the disk and the dimensions of the circular saw.

Read also – Top 5 Circular Saws – Woodworking Tools

2- Wattage

The greater the motor power, the less chance that the wood will stick. In general, the interlocking usually happens more easily in hard or very thick woods.

Do you want to work with plywood and MDF? A circular saw with 1200W power is a good alternative. You will not have any difficulty making the cuts. Models with 1,500W power are indicated for harder and thicker woods.

3- Cutting angle adjustment

The vast majority of circular saws allow you to choose the angle of inclination of the cut. It is usually up to 45 degrees.

This is possible thanks to an adjustment system. It allows you to choose whether to use any inclination or not on the cutting disc. There are usually predefined values to select. These are 15, 30 and 45 degrees.

4- Cutting depth

Do you work with thick pieces (more than 5 cm)? Then, it is recommended to check the maximum depth of cut for the circular saw. If the material is thicker than this value, it will not be traversed by the cut.

The cutting disc should be thicker than the material to be cut. In general, 8cm depth cut is a value that will meet your needs to cut any thickness.

5- Blower

During cutting, normally, powder and bran cover the cut site. If you cannot see the cut line, you will need to stop work to remove dust.

Do you want to avoid the accumulation of dust on the material to be cut? Then, choose the model of circular saw with a blower. It will help to remove dust as the cut is made.

6- Suction outlet

Some circular saws direct all the powder produced to a specific outlet. A vacuum cleaner is connected there. If you choose a model with this feature, it will prevent dust spread.

The suction outlet is very useful if you work with plywood, MDF and MDP. These materials produce a light powder. You may need to buy vacuum cleaner separately.

7- Supply voltage

Circular saw is available in 110 and 220 Volts versions. Unfortunately there is no product on the market that supports both voltages. Before closing your purchase, be sure to check if you are buying the correct option.

Depending on your profile, an alternative may be to purchase a battery-powered circular saw. Many of them include bivolt battery charger. An added feature is that the batteries can be removed and replaced easily. It allows you to work in places without electricity for long periods of time.

Categories
Woodworking Tools

What is the Difference between Circular Saw and Jigsaw?

Want to learn more about a circular saw? In this guide, you will find all the information about difference between circular saw and jigsaw.

There are many types of saw for working with wood. The circular saw is just one of them. It is ideal for straight type cutting.

Difference between circular saw and jigsaw

Depending on the job, you may need to know difference between circular saw and jigsaw. In the jigsaw there is no disc to cut. But, there is a blade that makes a back and forth motion. This way, it cuts the wood, aluminum or some metals.

The jigsaw has a great advantage. You can use it to cut with details or with recesses. It may be impossible to do same job with a circular saw. In general, the circular saw is mainly used for straight cuts.

Read also – Top 5 Circular Saws – Woodworking Tools

The power is the main difference between circular saw and jigsaw. The jigsaw is usually geared towards more delicate objects. The power in the motor of a jigsaw is usually lower. It is approximately half than the power of a circular saw.

The circular saw is usually the most suitable option for carpentry and joinery. The jigsaw is suitable for work with more delicate and fine materials.

Circular saw or marble saw?

In addition to the circular saw, there is another category of saw that has a cutting disc. It is the marble saw. This is a saw with a smaller diamond blade. Generally, it is used on harder materials than those cut with a circular saw.

The marble saw can be used to cut bricks, floors, tiles, marble and even concrete.

Another difference is that the rotation of the marble saw. It is usually higher than that of the circular saw. This is one of the reasons why it is able to cut such hard materials.

How much is the cost of circular saw?

It is possible to find circular saws starting at approximately $250. These models usually have a cutting disk of 7 1⁄4 inches (18 cm). They also have the power close to 1000 Watts. They are indicated for use with MDF, MPD and wood. Many models in this price range already have tilt adjustment.

Do you intend to have a battery-powered circular saw? The most affordable options start in the range of $1,000. Some of the models are in the range of $2,000.

The most sophisticated portable circular saws have prices in the range of $3,000 to $5,000. Models in this category usually have battery power, brake and soft start. Some models in this price range are also used for metal cutting.

The circular bench saws have prices starting at approximately $1,000. The most sophisticated models have prices that can exceed $5,000.

Where to buy circular saw?

Circular saws can be found at hardware stores and also at home and construction stores.

Are you looking for a large number of options to choose your circular saw? Do you not have time to look in several stores? A very practical alternative is to buy your tools online, in the comfort of your home.

One example of sites with a wide variety of circular saws is Amazon.

Categories
Woodworking Tools

Purchasing Criteria for Table Saw

Before going shopping, it is advisable to know the purchasing criteria for table saw. Here, you will know important criteria when buying a table saw. Come on!

Purchasing criteria for table saw

1- Wattage

The power is one of the important purchasing criteria for table saw. It establishes the rotation speed of the available disk with which it will be worked. In addition, it also means the size and material type, you need to cut safely.

The power must be as a minimum 1,000 watts. It is always better if you include speed regulator. It will allow you to regulate the power to the material type you need to cut.

2- Table

You must make sure that the table has the right strength for each job. It must be made of stainless steel. It’s the high-strength material that guarantees the correct support. It is also necessary that it is stable and has resistant rubber supports. So, it prevents the table to move.

Instead, also check that it is very easy to assemble and to hold. This factor will enable you to work as quickly as possible. Ensure that your cutting operations are not affected by the saw assembly.

Read also – Top 5 Table Saws – Woodworking Tools

3- Material to be cut

The tool must have the suitable power for the material you need to cut. The suitable machine is also very important to work. It’s important that you determine the material thickness you will need for your table saw.

For this, you must know that the most standard thicknesses in wood are 25.4 mm, 31.7 mm, 38.1 mm, 63.5 mm and 76.2 mm.

Are you thinking to cut plank or plywood sheet? Then, you need a tool having a base for parallel cut and they have better extensions. These sheets can be very wide and long.

4- Frequency of use

Take into account the power of machine according to the frequency of use. Are you going to use the machine for occasional DIY jobs as a hobby? Then, it is good to buy a low-powered machine, perhaps a bench saw.

In general, the most powerful saws are ideal for professional tasks. These machines are much more expensive. But, they are prepared to work tirelessly for the entire working day.

5- Accessories

Normally, the table saws have a range of accessories. Some are essential for efficient and safe use. One of them will enable you to tilt or rotate the saw blade to make miter or angled cuts. Others, such as guards, will prevent splinters from bouncing.

Among the accessories, there are some that you cannot miss. Look for accessories such as push rods or bases. They will help you slide the cutting materials on the table.

6- Type of cut to be made

Do you like to work with very thick cutting pieces or want to make bevel cut? Then, choose a tool with adjustable cutting disk regarding inclination and height. It is typically found at face of the tool, in the form of a crank. It slides along a scale of degrees.

Categories
Woodworking Tools

What You Should Know About the Table Saw

The table saw is one of the tools that must not be missing in any workshop. It is the best cutting machine out there. Know about the table saw in detail.

Here, you will see its main features to know about the table saw. We will answer questions that are frequent among its consumers.

What does a table saw consist of?

The table saw mainly consists of a cutting disc. It exists in the center of a horizontal table. On this table, you will find most of the tool (motor or axes, among others). The saw is in a fixed position. The operator pushes the parts on the disc to make the cut quickly and accurately.

As already mentioned, the table saw can be the first tool present in a carpentry workshop. It is the main part of this activity. There are different options available to it. So, the parts return several times to the cutting table. The table saws allow you to make cuts in:

  • Straight line in the direction of the wood grain
  • Transversal through the grain of the wood
  • Miter and bevel, that is, at an angle

Read also – Top 5 Table Saws – Woodworking Tools

Types of table saws and know about the table saw

It is important to know the different types of table saws that exist. Mainly, there is a discrepancy in their names. It can cause confusion for a consumer with little experience. Many people refer to saws and table saws with the same expression. But, they are very different tools.

It is also common to associate the table saw with certain semi-portable models. In reality, table saws are divided into several types. There are static and semi-portable models. This confusion is quite common, even among manufacturers. This is because most incorporate a table that can be installed in several places.

The following is an explanation of the different types of table saw.

Semi-portable saws

Bench saw:

  • It is the lightest and most affordable table saw.
  • It has no wheels or support.
  • It is mounted on a work bench.
  • Made of aluminum, plastic and other lightweight materials.
  • For DIY and home use.
  • Cutting of soft and plywood.

Compact saw:

  • More powerful and with better precision than the bench saw.
  • It has support to support itself.
  • With dust removal connection.
  • The table can be made of cast iron.
  • Driven by a universal motor.
  • Straight and angled cuts in solid wood and fiber boards.
  • Light and DIY jobs.

Saw with wheels:

  • It is the most robust and heavy semi-portable saw.
  • With anodized aluminum surfaces.
  • It has a support that can fold to save space.
  • It has wheels for easy transport.
  • Cutting wood, solid wood, parquet, plating boards and plastic.
  • Ideal for construction professionals.

Stationary saws

Contractor, hybrid or cabinet saw:

  • High standard machine, expensive, heavy, bulky and very durable.
  • Used in large workshops, industries and specialized schools.
  • They can do all types of work in hard wood, pine, plywood or thick metal sheets.

What type of table saw is most convenient for me?

This is a basic question when buying a table saw. Are you a professional looking for a machine for intensive use? You will have to choose a stationary and high-performance model.

For light work, it is best to buy a semi-portable model, particularly a bench saw model. The accuracy of these saws is very good and they are also very compact.

Categories
Woodworking Tools

Tips on How to Use a Pneumatic Nailer Correctly

Many people use a pneumatic nailer. But, most of them do know how to use a pneumatic nailer correctly. Let’s know how to use a pneumatic nailer correctly.

The pneumatic mailers are fantastic tools that can produce tons of work in no time. As a power tool with great strength, these pistols are extremely useful. But, they are also dangerous. It is very important to use carefully. With an appropriate technique, you can obtain the best results and avoid accidents. Here, read some tips to get the most out of this tool.

Read also – Top 5 Electric Nailers – Woodworking Tools

Tips on how to use a pneumatic nailer correctly

Read the manual. Each perforation is different. Subtleties are important to understand. The manual will outline important information regarding safety, handling, tension and warranty. Understanding tools is the best way to extend its life. Keep the nailer constant. Do not try to make a hammer movement while using it. So, this will prevent any unwanted markings on the working surface.

Never carry the tool with the handle. Accidents can be avoided in almost all cases. When you are ready to use it, press forward slightly. It will activate the safety mechanism that is built into the tool. It unlocks the tool to prevent unwanted discharge.

Do the nails not go far enough? The pressure in the hose should be increased until you are satisfied. When nailing, the insert must always be level with the impression and receptive surface. This will help to ensure a straight and level finish.

Always check the length and size of the nail. If the size is incorrect, your result will not be pleasant and may have to be redone. Sink the nails into the frame as much as possible. If necessary, use a strap to fix the structure to be fixed. It will avoid the damage during your work.

You should make sure that the area you are working on is a smooth surface. You may have problems when you hit a knot on a piece of wood. In such cases, the nail may bed or curl out of the trim and spoil the mold.

Be safe to use a pneumatic nailer correctly. Never wear loose clothing, make sudden movements or use it without looking around. This is a tool of power and must be respected as such. Never leave the tool bit active with children or animals present. Make the measurements before nailing.

Following these tips will help ensure productivity. Attention to detail to use a pneumatic nailer correctly. They should help. A pneumatic nailer can increase its efficiency seven times. So, it should be used to your advantage and get the job done right.

Pneumatic system in fixed installation, for example factories, uses the compressed air. The compressed air can provide a good supply. Normally, the air has no moisture. The compressor has also a small amount of oil. It prevents corrosion of the mechanical components and lubricates them.

Users who use pneumatic nailer do not have to worry about toxic leaks. Autonomous or smaller nailers can use other compressed gases. They are dangerous and can cause asphyxiation, such as nitrogen supplied in cylinder.

Categories
Woodworking Tools

What Should You Take Into Account to Buy a Pneumatic Nailer?

Do you want to buy a pneumatic nailer? Let’s know the key features of a pneumatic nailer to buy a pneumatic nailer.

There are various models of Pneumatic Nailer that have their own characteristics. They distinguish from each other. It is convenient to evaluate each of them to make a selection. So, make a selection of one model that is ideal for you.

Think to consider to buy a pneumatic nailer

We can start by identifying if the model fulfills a double function or a simple function. That is, if it can nail and staple at the same time. Or, on the contrary, it only has the action of nailing.

Then, you have to pay attention to the air pressure available to each model. They have both the minimum and maximum levels. These values will let you know if the tool has a suitable power range. It also must be adjustable and sufficient to work on surfaces of different densities or thickness

The nails or staples, a nailer can use is the next thing of great interest. Check what types of nails or staples you use to perform the work. Can the tool work with more types and sizes? If yes, then, the tool is more functional and versatile for any material.

Read also – Top 5 Electric Nailers – Woodworking Tools

It is also important that you verify the class and capacity of the loading cartridge. Normally, a cartridge can store up to 100 units. And a roll can store between 200 to 300 units.

Definitely, you should observe the design to buy a pneumatic nailer. The ideal is that you look for a Pneumatic Nailer that is ergonomic. It must have a better handling, in addition to being comfortable to use. That is, look for those that have a light weight and a rubber-wrapped handle.

On the other hand, this powerful tool can potentially injure someone. It is necessary that you confirm that it has some safety mechanism. These are trigger block system, which prevents it from being accidentally triggered.

You should also check in the same way the companies behind the creation of each model. There are some best known companies with more experiences in the market. They will guarantee that it is a product of excellent quality.

Finally, you can know other relevant data such as the noise level. Has it a briefcase where it can be stored safely. Does it already includes some nails or staples to use immediately after its purchase.

How much does a Pneumatic Nail Gun cost?

The value of a Pneumatic Nailer varies from model to model. It is due to the differences in its capabilities and functions. The price depends on the material with which it is manufactured. It depends on the safety system with which it is equipped. It also depends on the possible complements that it may have.

The common models have a range of cost ranging from €40 to €90. The values are consistent with each model. Acquire a tool that will save you working time. Also, choose one that gives you the possibility to choose the best model that suits your budget.

Of course, you must take into account the compressor to buy a pneumatic nailer. It provides the pressurized air for this machine to work. You can also purchase it separately to use in your Pneumatic Nailer.