Woodworking Tools

How to Use Miter Saw – Top 10 Tips

You may know how to use miter saw and what tasks it can perform. We will present here more tips about how to use miter saw.

How to use Miter Saw – Top 10 Tips

1. Let the blade stop

You must wait for the blade to stop turning completely. Keep its blade in the downward position.

Do not raise the blade until it stops. Make the cut, let the trigger go and count to ten. It’s not that difficult, is it?

Read also – Top 5 Miter Saws –Woodworking Tools

2. Mark the danger zones

While working with this tool, you focus only on work and forget the danger zones. Mark the lines with red color on the surface and on the fence of miter saw. This will indicate the danger zone and prevent errors when working on the miter saw.

3. For repeated cuts, use stop blocks

In addition to cutting, most woodworkers make repetitive cuts. Some projects are made up of many repetitive cuts. Despite measuring each time, you must measure it once and mount a cork.

A cork is a piece of scrap wood. It would help you to cut several pieces of wood of the same length. This will ensure that you provide the proper parts and save time.

4. Use the block to define chamfer angles

Before miter saw, there was no tool that would facilitate to cut at different angles. It was difficult to cut wood or other material at angles. But, this is now possible with this power tool. It can be much easier by placing the block at the required angle.

To build the block, cut it at a 90-degree angle without tilting. Then, rotate the saw to the desired angle and lower it. You will find this feature in Bosch products.

5. Mark the line on the slide

When making cuts, your hands may tremble due to not getting the proper, finished cuts. To avoid this, mark the straight line on the blade that helps obtain the finishing cuts.

6. Use the stand that can move

Usually, in the workplace, you need to constantly move the miter saw. Mobile support will help in this way. You can easily adjust the miter saw the way you want. With the mobile miter saw, the task becomes as easy as eating the pie.

7. You can install the laser

It helps illuminate the thin line in the work piece. It also helps you cut faster and at the exact cut line you want.

8. Just allow the miter saw blade to have the maximum speed

It is one of the most important tips on security measures. After turning on the miter saw, let it reach at the maximum speed before working. Some miter saws cut smoothly and others do not.

After work, release your hands from the miter saw trigger and slow down the blade itself. Before the blade actually rests, if you lift the blade, the cuts will come off the table.

9. Buy the double slope saw

Double tilt saw or double bevel saw is much more useful than a single tilt saw. This facilitates bevel cuts.

10. Know your hook angle

The blade with a good 10 degree positive hook angle makes aggressive cuts in the wood. It is best to keep the blade angle 10 to -5 degrees.

Woodworking Tools

Tips and Precautions before Buying a Miter Saw

Do you want to be comfortable and satisfied with the investment of a miter saw? Buy one that can offer good results. Know the tips when buying a miter saw.

Therefore, you will be able to analyze all the characteristics of miter saw. And decide on the best model and make the purchase of an excellent tool.

Read also – Top 5 Miter Saws –Woodworking Tools

Tips and precautions before buying a miter saw

The first advice is based on the precaution to be taken. Why do you have to take precautions? Simply because the miter saws are tools that, although they help simplify excellent work. They are of high danger and can cause accidents directly on your body.

The whole body is exposed to the discs of cuts that rotate at high speed. The fingers, hands and face are some of the most exposed body parts in this case.

You must be very aware when you are using a high-power miter saw. Never expose your body to the cutting discs so you must protect yourself. The sliding saws are more vulnerable to accidents than stable saws.

When working with long-range miter saw, always keep a distance between the material and the cutting disc. The saw may eject pieces unexpectedly on your face.

The cutting head is never extracted towards the body. Keep it always towards the opposite side.

When you are making short-range cuts, make sure you have good vision and enough lighting. So, you can determine the small cut that is being made and avoid damaging others. It can damage the material or even cutting more than is due.

Never place your hand as a guide between the cutting blade and the material. The distance between them is very short and the saw is very powerful.

Saws by their way of use

  • The manual saw: This is the most classic model. It is very efficient and lightweight machines to handle. To use them, you should only make a guide in wood or aluminum. And, trace the angles of the cut that are needed.
  • The electric saw: This is the model preferred by the carpenters since it is electric. It is most powerful than manual with variable speed.
  • The engine saw: It works as a gasoline-based engine. It is a model rarely used in workshops. They are usually used in remote areas to cut thick wood or even for domestic use.

Saws according to the needs it covers

  • Basic miter machines: They are used because of the low cutting capacity. They are only limited to making miter and transversal cuts. They are ideal for simple cutting activities with cheap prices.
  • Composite miter machine: This can be used as a basic saw and also one that allows bevel cuts. The bevel cuts will be in two ways the single and double bevel. It will depend on the need of the cut to be made to the material. These are mostly used by carpenters and professionals because of their capacity.
  • Sliding mower: This incredible versatile model allows you to make different cuts in thick and wide materials. It is used by professionals who work continuously with a machine. The price of the saw is higher than the others.

Woodworking Tools

Orbital or Roto-Orbital Sander? Which One is Right for You?

Sanders are already quite popular in most segments. But while purchasing, know which machine (orbital or roto-orbital sander) is ideal for your activity?

As the name suggests, machines are responsible for carrying out activities such as sanding, finishing. Depending on the model, it is capable of even polishing.

The orbital sander and the roto-orbital sander are the two most popular models.

Both have the same work objective. But, they have slightly different characteristics and functions.

Check out everything and decide you need to buy orbital or roto-orbital sander.

Read also – Top 5 Orbital Sanders – Woodworking Tools

What is an Orbital Sander?

The orbital sanders only perform light finishes smoothly. They are portable, small and lightweight.

The main difference between the roto-orbital models, is in its square base and in the dust production index.

They are easy to control and their operation takes place through oscillations. Its use is recommended for those who work with drywall, MDF and plywood. These are services performed with the help of fine sandpaper.

Advantages and disadvantages of orbital sander

The model also offers great finishes and excellent cost benefit with lower prices. Another positive point is the use of common and fine sandpaper.

But as nothing is perfect, orbital sanders are also not and carry negative points. These are such as, the difficulty of adding sandpaper to the machine itself.

It is necessary to fit the sandpaper correctly, slowing down productivity a little. It’s is a problem especially if the user uses a lot of sandpapers a day. It cannot remove very heavy materials, and may even scratch the part if forced.

What is a Roto-Orbital Sander?

It offers sanding and promoting excellent material removal. It is also the favorite sander of professionals who need to perform impeccable work.

What are the differentials of orbital or roto-orbital sander?

Remember that the orbital has a square base. Well, here it will be the opposite.

The roto-orbital sander has a round base. In addition to the oscillating movement, is also capable of rotating your disc. This offers more complete jobs.

The machine also eliminates those whirlpools that orbital sanders end up leaving behind. Not to mention, it guarantees much more performance during activities.

In addition, roto-orbital sanders tend to be more practical and efficient. It provides greater agility and productivity in the processes.

Speaking of process, the roto-orbitals have a higher rate of oscillation. Consequently, it generates larger diameters as well. They usually offer 2.5 mm in diameter. It helps with the rotation of the disc and adjustable a lot when roughing.

What are its advantages and disadvantages?

The roto-orbital sander is an aggressive tool. It has high production capacity, firmness and precision.

Its use generates neat finishes. Even, it can remove marks and unevenness. It accompanies the sharing of dust to prevent the accumulation of dust during work.

But despite being perfect in some ways, the model also carries its disadvantages. It has higher cost, for example.

Another disadvantage is that sometime, you need to find the specific sandpapers to use. These disks are often difficult to find on the market, which makes activity a little difficult.

Woodworking Tools

Learn How To Maintain An Orbital Sander!

Orbital sanders do very important job after any woodworking task, the finishing job. Know how to maintain an orbital sander to ensure better performance.

They use an adhesive holder or clamp holders to support round sanding pieces. As you hold the machine against the wooden surface, it rotates in an oblong pattern. This reduces the number of marks on the wood. Orbital sanders produce a lot of dust. And, to keep them in good condition, you must maintain an orbital sander after each use.

You will use:

  • Compressed air
  • Screwdriver
  • Spare sandpaper
  • Naphthalene
  • Rags
  • Rigid container


1- Remove the dust bag and empty it. Most of these bags are inserted into the powder tube. After emptying, use compressed air to clean it thoroughly.

2- Remove the sandpaper from the support. The adhesive can create pellets on the surface of the substrate. It may cause imperfections in the next sanding.

3 – Inspect the support for imperfections. Often, the ends wear out and become pitted. If you notice that the support is excessively worn, remove the screws Replace it with a new one.

4- Clean the sander with compressed air. Take care with the air vents of the motor. And remember to wipe off any wood dust inside.

5- Clean the plastic surface of the sander with a cloth moistened with naphthalene. Naphthalene is a quick-drying chemical that cleans dust from plastic.

6- Place the sander and dust collector in the rigid container that came with the tool. Store them in a dry place until you use them again.

Read also – Top 5 Orbital Sanders – Woodworking Tools

20 Orbital sander tips – Learn more about this tool

  • Never touch the sandpaper while the sander is running.
  • The sander plate must always be securely attached to the part, and without bending.
  • Lubricate the sander regularly to avoid drying the blades.
  • To reduce operator fatigue, choose sanders with an ergonomic design.
  • Do not forget PPE’s like: ear protector, safety glasses or visor, apron and mask.
  • Avoid using loose clothing when using the equipment.
  • Do not use excessive force to cut or sand. The equipment disc was not designed to support its weight.
  • Before starting to operate the machine, allow the disc to rotate freely. And check that it is not oscillating. If so, try to correct it.
  • Use the correct disc for the job to be performed. The use of discs not suitable for certain jobs is a major cause of accidents.
  • Always use both hands to operate the equipment.
  • Do not use the equipment if it has bare wires.
  • Keep the power cable at a certain distance from the equipment, for more safety.
  • Do not use the equipment near toxic or flammable products.
  • At the end of the work, wait for the disc to stop completely before storing it.
  • Store the equipment in an appropriate place with the disc facing up.
  • Work and keep the equipment out of the reach of children or unknown people.
  • Do not press the cutting disc to the side. It was not made for this.
  • Always keep the workplace organized and clean.
Woodworking Tools

Tips to Use Electric Screwdriver and Accessories

Needing a little help to unscrew, tighten and fix rivets and screws? Investing in a screwdriver! Let’s know the tips to use electric screwdriver.

The good thing is that you can use various accessories with a screwdriver. It can make your life even easier. It will help you when assembling and disassembling furniture, car accessories and much more. Want to know more about tips to use electric screwdriver? Come with me!

Read also – Top 5 Electric Screwdrivers – Woodworking Tools

Tips to use electric screwdriver

Do you want to achieve good results with your screwdriver? You need to keep an eye on some details that are very simple. But, they make all the difference in the quality of your work. Know the tips to use electric screwdriver to use your machine in a very practical way:

Push the tool against the screw: Fit the bit to the screw to be screwed. It is important to put a little pressure on the screwdriver when it is turned on. Otherwise, the bit rotates false on the screw, which can ruin both.

Use the ideal bit for each screw: Change the tip of the screwdriver whenever necessary. Sometimes you may find that a slotted bit can work well with another screw. But, it can go wrong, break your machine and still hurt you. No improvisation.

Attention to pipes and electrical cables: Always check that the wall or surface you’re going to drill has no pipes or electrical wiring. If they are punctured by accident, you can create a leak or even shock!

Choose the right power screwdriver: For tightening the socket or assembling a small piece of furniture, the 3.6V screwdriver is great. The 4.8 volts are good for heavier maintenance.

Now, work on metal, wood and masonry walls can be done with a 12-volt screwdriver. The 14 to 18-volt screwdrivers are good for concrete and masonry.

Bits and Sockets: Screwdriver Accessories

Look, the screwdriver is a very simple machine to use. And the accessories you need to have are bits and sockets! They can be purchased alone or in kits with several pieces. For you to have an idea, some types of kits come with more than 40 bits.

The bits are the tips. You put them on the screwdriver to place or remove screws and rivets from anywhere.

The sockets are like adapters. They serve to fit the bits in the screwdriver when they’re bigger than the machine entrance. It has models of several different sizes and they can be magnetic. It helps to hold the bit more firmly than traditional models.

The screwdrivers usually come with several bits and sockets. But, if you want, you can also buy separately.

How to care for screwdrivers and accessories

It’s very easy to keep your screwdriver and its accessories always ready for use. Store the bits and sockets in packaging in which they were purchased. Another cool option is to put them in toolboxes. Some have their own spaces for small pieces!

And don’t keep the accessories or the machine dirty. Basic cleaning can be done with a dry cloth and soft brush. Do not clean your machine or exchange bits or sockets with it plugged in.

Woodworking Tools

Electric Screwdriver or Drill? Know the Functions and Differences!

Electric screwdriver or drill? With similar characteristics and functions, they have technical specialties and very different uses. Let’s know more.

It is not for nothing that they are two different pieces of equipment. But, they are very requested in construction sites. They are used in joinery services, for small renovations and domestic services.

Electric screwdriver or drill machine? See what the differences between them are. Also, find out which is the ideal machine for your work!

Read also – Top 5 Electric Screwdrivers – Woodworking Tools

Electric screwdriver or drill machine?

The electric screwdriver is used to fix, tighten or unscrew screws and rivets. It provides greater firmness and fixation to the screw. It is not possible using a handy screwdriver. It is available in different models, with different shapes. It can be simple or impact, electric battery or cable, and pneumatic. It is widely used for assembling furniture, fixing objects, plasterboard, etc.

Some screwdrivers can also be used as a drill (and vice versa), just change the tip. In general, impact screwdrivers have more strength than ordinary drills. However, the common screwdriver is lighter equipment and has less strength and pressure. As compared to a simple or impact drill, electric screwdriver has less power. When using on very resistant surfaces, it can suffer damage. The impact screwdriver works like a wrench, while the high impact drills have a hammer function. The impact drill serves to drill harder surfaces and offer greater resistance. There are also models on the market that have the dual function of screwdriver and drill.

The drill is essential for the installation of devices from the hydraulic and electrical system. For furniture and decorative objects in a building, the drill machine is very important. As its name implies, it serves to drill surfaces. It is available in several models, from the most common to high impact tools. It can be bench, column and pneumatic. Simple or impactful, there are many features in each drill model. They are such as power, speed, size and type of the mandrel. The tip for drilling is available in different formats and thicknesses. It relates to the particularities and strength of each material to be drilled. You can drill in materials such as concrete walls, wood, tiles, porcelain and metals, among others. The stronger the surface, the greater the force requirement of the tool. Therefore equipment with greater power also needs variable speeds.

Could you not decide between electric screwdriver or drill? Think about the time of use and the types of materials to be drilled / screwed. Consider whether it is intended for professional or amateur and domestic use. There are several models on the market, suitable for light or heavy. They’ve specific characteristics that will be decisive for the good use and performance of the equipment. And remember; use the appropriate personal protective equipment. They are such as gloves, goggles and ear protectors. Use them every time when you use a screwdriver or drill!

Do you already know which tool to choose for your work? Do you have any other tips to help our readers when choosing a screwdriver or drill? Leave us your comment!

Woodworking Tools

Things to Consider When Buying a Drill Machine

Are you in search of the best electric drill? It is important to follow some criteria that will facilitate when buying a drill machine.

Here, we will show you the main aspects that you must take into account before deciding. Thus, you can count on a small guide to assess quality and price.

Read also – Top 5 Electric Drills – Woodworking Tools

Things to consider when buying a drill machine

1- Wattage

An adequate power for a drill for small household tasks is typically between 500W and 850W. If you have more than that, it can be considered oversized for this type of service. They are indicated only for use professional. Cordless drills are usually differentiated by battery voltage.

Drills with 18V batteries will have stronger motors. However, the power delivered, in watts, rarely reaches 500W.

For more power, you’ll need a bigger budget and professional models. With the lower power, you will not be able to drill hard material for example concrete.

2- Automatic brake

This is a very important feature for user security when buying a drill machine. The automatic brake stops the drill from turning automatically when you release the trigger. In models without a brake, the motor continues to rotate and stops only due to friction. Cordless electric drills often include this feature as standard. With cable, it can be considered an additional.

3- Handle and accessories

Electric drills can have two types of design: T-shaped or pistol. There are also electric angle and column drills. Angles are ideal for working in difficult places. But, they are an overly specific category that will not be covered in this guide. What every type of it is, the design must be ergonomic and comfortable.

Another interesting accessory is an additional handle that comes in box from the factory.

4- Percussion

Good electric impact drills are capable of drilling through any surface. They have toothed disks that are activated when rotation starts to become difficult. They transmit these impacts to the surface, facilitating the drilling of hard materials.

It is possible to find electric impact drills (with the hammer function) with or without cable. But, it must have enough power to drill resistant surfaces like concrete. Most cordless electric drills do not have enough strength to beat this type of material.

5- Speeds

The best cordless electric drills for home or professional services have different mechanical speeds. There are gears that control the speed and power. For example, for concrete, it is convenient to use the “1” position. With less speed, it gives more power to the machine, and percussion does the job.

You can also control the torque with a selector, depending on the model. It can vary between 10 and 30 positions.

6- Drums

Electric battery drills have less power. When they unload, you have to stop the service until it is loaded. Some models include an extra battery, but this is not standard. Some batteries have a quick charge function. It allows them to fully charge in less than sixty minutes. Drill batteries are usually lithium. These batteries are lightweight and have a long life.

Woodworking Tools

Important Things to Know about Drill Machine

There’re many questions, the users want to ask about drill machine. Let’s check out those things to know about drill machine.

Things to know about drill machine

1- Cable or battery drill machine

Is it better to have an electric drill with cable or battery? When choosing between these two types, you have to know what tasks you want to perform. Below, we present a list with the pros and cons of each type.

Electric drill with cable


  • Greater power
  • For professional jobs
  • Suitable for resistant materials


  • Less freedom of movement
  • Overheat
  • Consume a lot of energy

Electric drill with battery


  • Freedom of movement
  • Compact
  • Light
  • Easy to handle
  • More functions


  • Less power
  • The battery runs out
  • Difficulty drilling hard surfaces

Read also – Top 5 Electric Drills – Woodworking Tools

2- Electric or impact drill?

Common electric drills drill using a rotating motion. The motor bearings transfer the movement to the drill, which penetrates the materials. This allows you to drill different materials, such as wood and metal. However, this function does not work very well on hard materials, such as concrete or rock.

Electric impact drills have percussion in addition to the rotation movement. That is, a movement from the front to the back repeatedly, allowing to “hit” the material. That’s why it is called impact function or hammer function. This movement is generated thanks to two splined discs that rotate in contact with each other. The impacts are transmitted to the drill.

3- Safety measures to prevent accidents with an electric drill

Electric drills are very powerful tools. You must be very careful when using them to avoid accidents and injuries. Its use can cause serious injuries, since the drills are sharp and quite dangerous. In this section, we show the safety measures you must take to use an electric drill.

  • Protective goggles: Metal or stone fragments may fly during drilling. In addition, some electric drills have internal brushes that generate sparks. It is essential to protect your eyes from sparks and splinters using goggles.
  • No to gloves: Although it seems counterintuitive but, it is not advisable to handle electric drills using gloves. Gloves are usually loose and the fabric can get stuck in the drill. This type of accident is common in workshops and must be avoided at all costs.
  • Do not apply excessive pressure: The electric drill has its power. It penetrates the material at its own pace. It is not advisable to force or push the tool. If the drill doesn’t penetrate, it is possible that the drill doesn’t have sufficient force. If the drill bit breaks, it can hit someone and cause serious injury.
  • Overheating: Similar to the previous point. Electric drills have their power, and you should not force them. If forced, they can overheat and the motor will burn out. If this happens, there possibility of causing damage or fire.
  • Materials: Do not use the drill machine on any material for which it isn’t suitable. If your electric drill doesn’t have an impact function, don’t use it on the stone.
  • Fixing: The chuck must always be securely attached. If the bit is loose, it can break and cause injury.
Woodworking Tools

How to Use a Wood Planer Correctly

Would you like to learn how to use a wood planer? Whether manual or electric, it will significantly improve the finish and quality of carpentry project.

This tool will save you money and time as it prevents the deterioration of wood materials. Follow the instructions here to learn how to use a wood planer correctly and safely.

Read also – Top 5 Electric Wood Planers – Woodworking Tools

How to use a wood planer correctly

1- Security before everything

Do not connect it to the plug until you are going to start using it. It is high-power power tool that puts sharp blades into operation.

You should also wear both eye protection goggles and masks. The mast will prevent you from inhaling, through your airways, any particles of sawdust. Instead, the great power of its motor requires that you do not use electrical extensions. It always involves a risk of overvoltage. Only connect it directly to a nearby plug. Never try to adjust any of its components while the equipment is plugged in.

Once you find yourself using the planer, you should stay tuned. Be focused on what you are doing. Free yourself from any kind of external concern or distraction. In addition, your work area must be well ventilated and illuminated.

2- Check that the planer is ready to work

Check the planer blade to make sure it’s sharp. Clean it completely after any use. Use chamois to clean the blade. If you do not want to clean the blade, replace it with a new one. Thus, it will avoid any rough cut in wood.

3- Put on correctly

Hold the planer tightly, but comfortable for you, by its both grip handles. Are you a right-handed person? Configure your worktable and planer accordingly. Keep the right hand on the back of tool and left hand to guide the tool. Configure the tool and worktable reverse, if you are left-handed.

4- Stick the wood with worktable

Use variable clamp or a clamping screw to fasten the wood with worktable. Do not let move the piece of wood in any way. A well insured wood will have a good brushing at the end. It also avoids injuries to you and other people who are close to the work area.

5- Choose a good starting point to start cutting

Lean the planer slightly forward to get the blade connected with the surface of the wood. Push the tool firmly (with your wrist and forearm straight) to move it. Use the lower body to apply force to move the tool.

6- Check the surface of the wood after every cut

After every cut, move your hand over the surface of the wood. It will examine visually that you have brushed in the angle you wanted. Continue brushing until you achieve the contours and texture of the desired surface.

7- Maintenance and cleaning of the wood planer

Special emphasis requires the maintenance of wood planers. Do it in terms of the thorough process of aspiration of all sawdust particles. Do the relevant lubrication that guarantees the prolongation of the useful life. Make sure the exact care of the investment you have made.

Woodworking Tools

Wood Planer Buying Guide – What is the Best Model in the Market?

Do you want to achieve professional finish and special touch to woodwork? The planer is a very suitable tool. Let’s talk about wood planer buying guide.

Do you want to equip yourself with a fast woodworking tool? This tool saves your time and effort compared to the manual sanding process. Take a look at our wood planer buying guide to buy the best tool.

Read also – Top 5 Electric Wood Planers – Woodworking Tools

Wood Planer Buying Guide

1- Manual or fixed

There are many comparisons of wood planers available over web about these products. You will simply see two key types: the manual and fixed wood planers. They both have different functions and utilities that you should know. Know which one is more convenient for us, according to our work.

Manual planers look like any manual tool. But, in this case, it is the planer that moves over the piece of wood. They are recommended to work on a wide range of wood sizes. They require some expertise and some more time. Brushing is done face to face, although since the process has a good speed. This is also not usually a problem serious.

The fixed models are simple to use and offer very good finishes without risks. They are usually quick in the process. However, the capacity of use of the machine is limited to the measure of the space.

2- Power and cutting capacity

It is another aspect in our wood planer buying guide. Brushing small wood for marquetry work is not the same as for large wood. Therefore, it’s important to evaluate the capacity of cut and the size that accepts the product.

On the side of the cutting capacity, we usually have an adjustable system. It works at different depths, depending on the amount of deteriorated wood. In some models, this capacity can reach 20 millimeters. If you do not want to spend so much, you can always opt for a cheaper model. It gives a second pass if you need it.

Related to the work capacity and cutting depth, we must consider planer power. Generally a good and economical planer will have the adjustable power parameters. Always, this should be somewhat higher than necessary. This allows us to work even with the hardest woods safely and getting the best results.

3- Comfort of use

Obviously, it varies if we talk about a table or fixed model or a manual model. But, it is still important, to obtain quality results on all types of wood.

In the case of table models, comfort is given by the elements. It allows the wood to be fixed to the work area. The easier they are to place, the easier it will be to obtain quality results. Some table planers also have a vacuum cleaner. It catches all dust and sawdust generated during the cutting process.

The vacuum cleaning is also great if you’re looking for is a manual cutting model. However, the most important thing in these models is the quality of displacement. We also have to move the machine along the wood. So, it’s necessary to have handles and fasteners that make movement easier and more precise.